Hueforge Tokyo

Hueforge TokyoMembershipThank you for supporting me in my work.Boost MeC'est gratuit et ca m'aide beaucoup :D, merci beaucoup pour votre soutientIt's free and it helps me a lot :D, thank you very much for your supportProject: TOKYO.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 170.94x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.6mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab White Transmission Distance: 7This print uses 3 unique filaments Swap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to Red At layer #17 (1.44mm) swap to White for the rest. Please leave a comment and like if you like my Hueforge. Thank you very much.Non-commercial !!!