Hueforge WWE The Undertaker two size

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x84.38mm in size. Same for the 400x225mm hueforgeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.44mmFilaments Used: #000000 PLA Kingroon Black Transmission Distance: 0.4 #d73737 PLA Kingroon Red Transmission Distance: 4.2 #dfa241 PLA Kingroon Orange Transmission Distance: 4.6 #ecffff PLA Kingroon White Transmission Distance: 4.7This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #8 (0.72mm) swap to Orange At layer #13 (1.12mm) swap to White for the rest.Boost MeIf you like this give me a boost me for more hueforge pictures. Thx