HueForge Zoro

Project: zoro_v1.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 126.01x225mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PETG BambuLab Basic White Transmission Distance: 4.8PETG GEEETECH BLACK Transmission Distance: 0.5PETG Sunlu Red Transmission Distance: 11PETG GEEETECH GREEN Transmission Distance: 9This print uses 4 unique filamentsSwap Instructions:Start with WhiteAt layer #6 (0.56mm) swap to BLACKAt layer #9 (0.8mm) swap to RedAt layer #17 (1.44mm) swap to GREEN for the rest. the warning of the floating regions can be ignoredThe model can be scaled, but the height (z) needs to stay the same