Hueforge_marksman

by TerryCreation

1 Downloads

0 Likes

0 Makes

Download Model

hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Charcoal At layer #13 (1.12mm) swap to Blue Gray At layer #19 (1.6mm) swap to Dark Red At layer #23 (