Hueforge_Uzumaki Naruto

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Charcoal At layer #24 (2mm) swap to Dark Red At layer #30 (2.48mm) swap to Lemon Yellow At layer #35 (2.88mm) swap to Jade White for the rest.