MakerWorld
Hueforge & Lithophane
Zum Modell
HUEOFORGE GTR
33
Downloads
16
Likes
13
Makes
HUEFORGE GTR Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Jade White Transmission Distance: 4 PLA Sunlu Matte Blue Transmission Distance: 3 !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Black At layer #3 (0.36mm) swap to Jade White At layer #12 (1.08mm) swap to Blue for the rest. ADVISE: If you want to change the color of the car, instead of blue, use the one you like best.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
