HUGElet v1.0

This is a one-pound (or antweight) fighting robot modeled after the Battlebots competitor "HUGE" in the 2018 Battlebots season. It is designed to be printed on a Markforged Onyx One / Onyx Pro / etc. printer, and all the parts should fit on the bed (individually, not together). Virtually all the parts in this are available off the shelf; however, the weapon bar will need to be manufactured in your method of choice (I recommend a waterjet shop).

Additional parts needed:

.375" hollow shafting with .65" wall thickness [weapon shaft] (McMaster part https://www.mcmaster.com/89955k449)

.375" ball bearings (x3, weapon hub bearings): (McMaster part 60355K45 https://www.mcmaster.com/60355k45)

.375" bore thrust bearing (McMaster part https://www.mcmaster.com/7488k12)

7/16"-long 6-32 flat-head screws [screws for Servocity hubs] (McMaster part: https://www.mcmaster.com/91253a147)

3/8"-long 2-56 flat-head screws [screws for Silver Sparks] (McMaster part: https://www.mcmaster.com/