Hulk grab moon

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x200mm in size. You can change X and Y but Z must remain the same.  You may print at higher layer heights below the Min Depth of 0.48mm  Actual Depth is 4.6mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments. Substitute as needed. Swap Instructions: Start with Black At layer #21 (1.76mm) swap to BambuLab Green At layer #25 (2.08mm) swap to Yellow At layer #30 (2.48mm) swap to BambuLab Green At layer #36 (2.96mm) swap to Yellow At layer #45 (3.68mm) swap to Jade White At layer #47 (3.84mm) swap to Yellow At layer #49 (4mm) swap to Jade White for the rest.