Hulk Superhero Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.84mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 4 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Gray At layer #10 (0.88mm) swap to BambuLab Green At layer #17 (1.44mm) swap to Sunflower Yellow for the rest.