Hungry Pug - Hueforge

The PolyLite Cream came out much lighter than pictured on Hueforge, and almost looks yellow. I recommend trying with a darker brown color, or maybe removing the grey filament. As always, scale on x/y only. Project: Hungry Pug Combo.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x125mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA Kingroon Black Transmission Distance: 1.6 PLA+ Elegoo Gray Transmission Distance: 4 PLA PolyLite Cream Transmission Distance: 4 PLA Kingroon White Transmission Distance: 7.2 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Gray At layer #13 (1.12mm) swap to Cream At layer #20 (1.68mm) swap to White for the rest.