Slicer Discord
Hurricane RC Hovercraft – 3D-Druckmodell von Thingiverse Thingiverse
Hurricane RC Hovercraft – Bild 1 Hurricane RC Hovercraft – Bild 2 Hurricane RC Hovercraft – Bild 3 Hurricane RC Hovercraft – Bild 4 Hurricane RC Hovercraft – Bild 5 Hurricane RC Hovercraft – Bild 6
Hobby

Hurricane RC Hovercraft

351 Downloads
252 Likes
1 Makes
Zum Modell
Short run video:
https://www.youtube.com/watch?v=K17ALo4rEuw

Only the second run, getting the hang of steering. This is not full throttle as I'm still learning to keep it going straight.

Another favorite toy of mine was the Typhoon hovercraft from Tyco. Here is my version.

You will need:
2 x 2205-2300 motors
2 x 5" props
1 airplane esc forward only
1 esc forward/reverse
3 channel RC receiver
RC radio
battery - I used Turnigy 3s 1300. Room is tight, needs to be small.
2 x wire coat hangers
Rip stop nylon
Plenty of 3mm screws
Epoxy
Kategorie
Hobby
Quelle
Thingiverse
Veröffentlicht
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
aufwändige Nachbearbeitung
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 2/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA, Nylon
Nachbearbeitung
Kleben, Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

1 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen