Husky (HueForge)

This Husky was created using Stable Diffusion. The dimensions are 150x150 Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Silver Transmission Distance: 2 PLA PolyTerra Cotton White Transmission Distance: 2.5 PLA PolyLite White Transmission Distance: 5Swap Instructions: Start with Charcoal Black At layer #11 (0.56mm) swap to Grey At layer #22 (