Thingiverse
Husqvarna Viking Thread Spool Cap
von SummitPA
95
Downloads
71
Likes
0
Makes
Various sized thread spool caps for a Husqvarna Viking Designer 1 Sewing/Embroidery Machine. 20mm, 22mm, 24mm, 26mm & 28mm spool caps
I couldn't find a suitable replacement anywhere and figured out how to make my own.
I gave credit to Gerald_E for the basic design and shape and used TinkerCAD to create my own based on his photos.
The center base hole is 5.45mm and still too tight to fit over the spindle. Use a 7/32 drill bit to enlarge the base hole. Don't drill all the way through the design. Just through the 3mm base.
These cost $13 each retail. Yours for $.04 in plastic and some electricity.
I couldn't find a suitable replacement anywhere and figured out how to make my own.
I gave credit to Gerald_E for the basic design and shape and used TinkerCAD to create my own based on his photos.
The center base hole is 5.45mm and still too tight to fit over the spindle. Use a 7/32 drill bit to enlarge the base hole. Don't drill all the way through the design. Just through the 3mm base.
These cost $13 each retail. Yours for $.04 in plastic and some electricity.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!