HY-SRF05 Minimal Mount/Bracket

Simple minimal bracket for an HY-SRF05 Sensor.

Size: 30mm x 47mm

For this bracket to fit the sensor properly, the pins have to be bent 90 degrees so that they are pointed straight off the board.

For mounting, this has been redesigned with M2 screws - You can use M2 to both mount the sensor and to mount the bracket.

For sensor mounting:

M2x6mm - 2 pcs
M2 nuts - 2 pcs (optional)

For bracket mounting:

M2x10mm - 2 pcs

Printing:

Infill 20% is enough, Print at 0.2 layer height.