hydrangea

Project: flower test 2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 3.1mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic BambuLab Green Transmission Distance: 1.2 PLA Hatchbox White Transmission Distance: 10 PLA Hatchbox Pink Transmission Distance: 12This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to BambuLab Green At layer #16 (1.6mm) swap to White At layer #31 (2.56mm) swap to Pink for the rest.