Thingiverse
Hydroflask 32oz sleeve
par Payton_Large
33
Téléchargements
31
Likes
0
Makes
# Note: use the compressed file, it has fixes but is too large
A friend designed this sleeve as a gift and I printed it for him. It took about 8-10 hours to print with supports only on the print surface (see picture). Afterwards, it needs some cleaning and sanding to remove overhangs. As a finishing touch, we applied a Molotov clear coat to it.
Once the sleeve is put on the hydroflask, use hot water or a lighter to soften the clips and bend them slightly in place.
Software used:
- Blender
- Prusaslicer 2.3.3
A friend designed this sleeve as a gift and I printed it for him. It took about 8-10 hours to print with supports only on the print surface (see picture). Afterwards, it needs some cleaning and sanding to remove overhangs. As a finishing touch, we applied a Molotov clear coat to it.
Once the sleeve is put on the hydroflask, use hot water or a lighter to soften the clips and bend them slightly in place.
Software used:
- Blender
- Prusaslicer 2.3.3
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !