Hydrogen Fuel Cell

A hydrogen fuel cell based on the microlaminar principle that does not require a proton exchange membrane. Common and conductive filaments are used (conductive, using graphite / carbon).
During production, the model is reduced to 1 mm and printed with 0.1-0.2 mm nozzles.
Fuel (hydrogen) is supplied from above, oxidizer (oxygen or air) - from below in antiphase. The cell does not pipe any other components and expensive catalysts like platinum, manganese oxide or nickel. Enhancing the efficiency of the cell - supplying infrasound to the fuel in antiphase to the oxidizer. During operation, the fuel cell is positioned vertically, since hydrogen is 15 times lighter than air, therefore uncontrolled diffusion does not occur.
Horizontal scaling and replication - obtaining the required amperage.
Vertical - getting the required voltage.

Hydrogen production is carried out directly on a vehicle from water using the properties of aluminum: a rotating titanium shaft immersed in water together