Hydroponic tower garden LED mount

This is an LED light holder I’m using with my indoor modular tower garden. It was designed for a set of Kihung 24w T8 LEDs I [found on Amazon](https://www.amazon.com/dp/B0811VX52Z?ref=ppx_yo2ov_dt_b_product_details&th=1), so ymmv if you’re using another light.

The lower arm and t8 socket snap fit together. I'm using zip ties to hold the wire in place in the channel under the lower arm. The upper arm snaps around the round plastic profile of the light, and should allow you to use the aluminum deflectors that come with the light if you wish.

I’ve also included a 40mm spacer module with an internal channel for cable management, which may be used at the base of your tower to tidy up the power cables. The spacer is in two parts (upper/lower) that twist together, so you'll need both if using. The spacer is completely optional though, and the arms can be used without.

Note that your tower will need to include modules that include the m3 mounting points to mount the LED arms.

## C