Hydroponic Tower Power Cable Grommet / Split-Cap

Checkout my other models for same tower! Hydroponic Tower Slot Cap (Algae Prevention) Hydroponic Tower Plant Support / Skewer Clip 🔌 Hydroponic Tower Power Cable Grommet (Light Blocker) If you’ve set up the modular hydroponic tower from Temu/Aliexpress (e.g. https://www.temu.com/goods.html?_bg_fs=1&goods_id=606315514590337 ), you’ve likely noticed the "power hole" in the lid. The original design forces you to push the entire connector through, which often leaves way too much slack cable sitting inside the reservoir, soaking in nutrient solution. This Split-Grommet design allows you to adjust your cable length perfectly. You can keep the excess wire outside the tank while ensuring the entry hole is 100% light-tight to prevent algae blooms in your water. 💡 Key Improvements Split Design: The cap is split down the middle so you can install it after your pump is already wired up. No need to unplug or disassemble anything. Custom Cable Slack: Pull only as much cable as you need into the re