hygrometer sliding bracket

This is a bracket for installing a hygrometer inside a drybox. There are two types of brackets that are inserted horizontally and vertically. The target hygrometer is rectangular and measures 48x28x16.

[feature]
-The hygrometer can be detached by sliding, making it easy to replace the battery.
-When you slide hygrometer and push it in, it will stop at the specified position with a click feeling at the end. Tilting the drybox or upside down will not cause the hygrometer to slide out.

[attachment]
Stick the adapter inside the drybox with double-sided tape. The flat side is the sticking side.

[print conditions]
-printing type: FDM
-printer: Original Prusa i3 MKS
-filament: PETG
-support: no
-brim: no
-raft: doesn't matter
-infill: 15%
-shell: 2
-nozzle diameter: 0.4mm
-layer height: 0.2mm
-print directions: Please refer to the photo.

[update]
2023/06/11
I added a vertical slide type one. "hygrometer_sliding_bracket_v.stl"