Hypercube Direct Drive BMG + BLT + E3D-V6

This was based on AMIDE Hotend (https://www.thingiverse.com/thing:4210434) by @Garuda1 and BMG Direct Drive (https://www.thingiverse.com/thing:3613857) by @keeev.

I redesign it to fit on my Hypercube Evolution, to use it with BMG clone + E3D-V6 + BL-Touch.

You will need (original or clone):
* BMG extruder;
* E3D-V6 type hotend;
* BL-Touch;
* 4010 axial fan (or 4020);
* 5015 radial fan;
* 4x M3 insert for 5015 fan mount + BLT mount;
* 3x M3 nut for 5015 fan + extruder mount;
* 4x M3x20mm screw for 5015 fan + BLT;
* 4x M3x15mm screw for 4010 fan;


I have been using this for about a month now, and so far I have had no problems, on the contrary, it has greatly improved the quality of the prints compared to the original bowden.

You will need supports only on "5015 fan mount", but if you rotate it you can print without the supports.


=================================================================
Updated:

New scale for "stl" files, now should open with no pro