Hypercube Evolution 12mm Y axis mounts

I wanted to use 12mm rods with bushings for my Y axis. These are the rod mounts. They are still a work in progress and are going through fine tuning. Added the 1.1 "Small Hole" files to have a rod hole of 12.25mm if the 12.5 hole doesn't clamp down enough.

I am using LMKW12 linear bearings from Misumi. These allow me to use 12mm rods with the 10mm Y carriage.
Updates to original parts:
Motor Mount:
1. Opened rod hole to 12.5mm.
2. relocated the screw and insert positions to work with larger 12mm hole
3. Added a small hole version with a smaller rod hole.

Idler Mount:
1. Opened rod hole to 12.5mm
2. Changed the clamping system to use a captured nut instead of insert. New hole location does not allow for insert to be used.
3. Added a small hole version with a smaller rod hole.