Hypercube Evolution Mk3 Orion and Nimble

I designed a mount for my Hypercube Evolution to fit the Orion module from precision piezo and the Nimble from Zesty. I use the groove version of the Orion module. For cooling the coldend i use a Nocuta 40x20mm fan. I put the fan on the right side, because i use the left side for the endstop switch.

I've also added the STL from the Original Prusa Mk3 fan duct.

As X carriage i would recommend the upgraded version from NedalLive https://www.thingiverse.com/thing:2437440. I use just three instead of five screws to attach the mount to the carriage.

#Note:
Please use DIN 562 squarethin nuts for this mount, you will need about 10 m3 squarethin nuts and about 5 m3 DIN 934 hex nuts.

#Updates:
>-STEP files included
>-Removed the brass inserts
>-Removed some leftover edges from an other modification I'm working on
>-fixed a hole on top of the 40mm fan
>-Moved the hole for the nut on the bottom left corner a bit up, so the part will not crack there as easy as before
-Added the