Thingiverse
Hypercube Evolution tennis ball damper
von jdobry
216
Downloads
150
Likes
1
Makes
Vibration damper based on tennis ball designed for Hypercube Evolution.
It could be used for any printer based on 3030 profiles.
BOM for one damper:
* 1pc tennis ball (of course)
* 4pcs M5 hammer nut for 3030 profile
* 4pcs M5x12 or M5x10 screws, HEX head recommended (DIN7380 or DIN912)
* 1pc M8x20 or M8x25 screw, HEX head recomended (DIN912)
Printed from PETG, 3 perimeters, 5 top/bottom solid layers, nozzle 0.4, layer 0.2, infil 20%, without support. Weigt is 50 grams each.
You can download and modify OpenSCAD source for this part.
Update 2018/01/10: tested on real printing during (silent) night. Works very well.
It could be used for any printer based on 3030 profiles.
BOM for one damper:
* 1pc tennis ball (of course)
* 4pcs M5 hammer nut for 3030 profile
* 4pcs M5x12 or M5x10 screws, HEX head recommended (DIN7380 or DIN912)
* 1pc M8x20 or M8x25 screw, HEX head recomended (DIN912)
Printed from PETG, 3 perimeters, 5 top/bottom solid layers, nozzle 0.4, layer 0.2, infil 20%, without support. Weigt is 50 grams each.
You can download and modify OpenSCAD source for this part.
Update 2018/01/10: tested on real printing during (silent) night. Works very well.
jdobry veröffentlicht auch auf
1 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
