HyperMix SlimeVR Case

I created this SlimeVR case to hold the Hyperion style PCB (see links) as I was struggling to get it to fit into the original case design due to lack of depth. The battery used is a 503759 1300mAh and the switch is a SS22F32 type and the strap is 50mm width.

To screw the case together I have used M3 heat threaded brass inserts and the screws are also M3 at 8mm long, you could adjust the design to use any screw and remove the brass inserts if needed.

To allow for an AUX tracker there is a hole in the top between the main body and the lid. This hole is designed to allow a 5mm sleeved cable to exit with a plug at the end.

Slime VR (Guide) Parts: https://docs.slimevr.dev/diy/components-guide.html
Hyperion PCB: https://oshwlab.com/lupinix/slimevr-hyperion-bmi160
Straps Used: Trilancer Elastic Cinch Straps (Available on Amazon)

I hope that this is useful to someone and feel free to use and alter it as you like.