HyperX Solocast Shock Mount

This is a shock mount designed for the HyperX Solocast microphone.The microphone fits snugly in the center ring.It uses thin hair ties as elastics.The modular rib design allows for the parts to be printed in an optimal orientation for strength and as such, assembly will require screws. - slow first layer is recommended for best adhesion of small parts- 0.2mm layer height or less- the ribs should be printed on their sides for best strengthEach part's file name was labeled with the necessary quantity as follows: "x1/x2/x4/x6". Included are 2 different length threaded arm connectors to choose between depending on your arm.**The print was tested with a limited number of arms. As such if you require a different thread size or length, please leave a comment and it will be addressed.**The design uses 2 thin hair ties, and an optional 3rd for security.To assemble the mount you will need 13 screws and nuts as follows:- 12 x 6mm M3 (Socket head)- 1 x 20mm M3 (Socket head)- 13 M3 nuts