I-Beam Pull Up Grips

Got an I-beam running through your space and want to do pull-ups on it? Print these grips and put them on. Print Settings:Printed in PLA with 4 walls and 15% Gyroid infill - which is plenty strong. Print in the provided orientation. No supports needed. Hardware:2x M5 Threaded inserts2x M5 x 12mm bolt Install 2x M5 Threaded inserts into the bottom of the grip along with a M5 x 12mm bolt to secure it to the beam. Make sure its nice and snug and it doesn't move at all.