I3 Mega PowerSmith PWL110S Stand

This is a stand for the PowerSmith PWL110S Work light that mounts to either sets of the bolts on top. The light is 1080 Lumen and lights up the print bed well in the room that I use this in which is moderately dark most of the time. The stand has indents every 30 degrees for rotation and 90 degrees of tilt. It reuses some of the hardware that it came with so the bottom part of the plastic needs to be tapped with something similar to 12 NC 24. The tap set that I had access to is rather small and in SAE only so I can't be more specific since the hardware seems to be metric. That leaves the hole a tad undersized but if completely inserted and removed a few times after the tap it requires little to no force to work the screw.

This is the first design I made myself in a long time so it has issues that I plan to fix later on with a version 2 when I have the time. The list of issues is:
-It is wobbly when the printer changes direction suddenly. Not enough cause a failure but just enough t