i3 PSU cabinet bracket

This is a tested solution for mounting standard i3 Mk3 (Prusa and clones) PSU on the wall. It's made to easily disconnect the PSU for maintenance, thanks to XT-60 connectors installed on the power cables.

I had trouble finding a good solution to move the PSU outside the IKEA Stuva cabinet, so I've created my own.

I've modified the original stl for Prusa PSU housing to incorporate those connectors. There's not much room inside but it'll squeeze in.


**CAUTION!** This mod requires you to solder connectors for 24V cables powering the printer. Be sure that you know what you're doing as errors might lead to serious
accidents.


This design was inspired by https://www.thingiverse.com/thing:4087876 and discussion on Fb Prusa i3 Bear Upgrade group.

What you need:

- 2x XT-60E-M mountable connector
- 2x XT-60 plugs
- 1x mini-jack mountable socket and plug for power panic cable
- 3x M4x8 flathead screws psu bracket
- 2x M5 flathead screws for the wall bracket

Here's