Slicer Discord
IBC Container Rain Water Filter – 3D-Druckmodell von MakerWorld MakerWorld
Garden

IBC Container Rain Water Filter

von MichaEgi · Garden
84 Downloads
69 Likes
22 Makes
Zum Modell
Filter for rainwater for an IBC containerThe aim is to filter the water well. If the super-fine filter clogs, the water flows through a somewhat coarser filter. I use moss or straw to make clogging of the filter even less likely.The fine filter is created by the print profile. Be carefull if you touch the print profile. The mesh in the lid is fine enough to keep out mosquitoes. You can also use the lid alone. The model fits for 30mm diameter hose. The hose is fed through a separate insert. If requested in the comments, I can also provide profiles for other hose sizes. This insert also makes it easy to clean the filter. I used white PETG to improve the durability. But I'm confident that PLA should work out fine, especially if not placed in direct sun.
Kategorie
Garden
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA, PETG
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

MichaEgi veröffentlicht auch auf

12 zusätzliche Modelle auf 1 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen