Slicer Discord
IC-7200 Side rail handles – 3D-printbaar model van Thingiverse Thingiverse

IC-7200 Side rail handles

door heathhey
13 Downloads
11 Likes
0 Makes
Model downloaden
These are rails that can be mounted to the side of the IC-7200 HF radio from Icom. They provide protection and handles. I have lifted the radio many times using these handles and when printed correctly they are strong enough.

I recommend printing them from a strong material, like PLA-Pro, Nylon, or petg. I am able to print these laying flat diagonally across the bed of my Creality CR-10 (I included a photo showing the placement). They can be split for printing on smaller beds. I have included the step files so they can be easily imported into your favorite 3d modeling software for splitting. The model can also be found on onshape.com: https://cad.onshape.com/documents/33e09a21b24d474b13643135/w/6a4811fbf7b498215269be4e/e/b8483531217bb1fb6870a2f6

To attach these to your radio you will need 4 m4x20mm screws and 1-4mm washers. Do not use any longer of screws or you could damage your radio.
Bron
Thingiverse
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Eendelig Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA, PETG, Nylon
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie