Props & Terrain STL Download - AEICCV01B - Ice Cavern Uncommonsby Aether Studios

Not all render pictures are shown due to space limited by Creality Cloud.Ice Caverns is a set with a lot of history. Carl wanted to cavern sets as soon as he started with us, but the Director said no and made him do Ice Caverns instead. It was a rough process, we went through a few options, trials, and tribulations before we got it right.The work exploded into well over 100 models, and with our latest revision and OpenLOCK versions this would have been over 300 models, so we had to split it. So that is what we did, and this is the “uncommon” set of files and less than fully utilized needed in most buildouts.RECOMMENDED PRINT SETTINGSLayer Size​: 0.15mm minimum. 0.1mm recommended.Infill​: 10% for all models recommendedTop/Bottom Layers​: 9 (or 0.9mm if using a different layer size than 0.1mm)Side Shell Count​: 2 (or 0.8mm if using a different nozzle size than 0.4mm)Raft/Brim/Supports​: None