Thingiverse
Icon AirFlite GoPro Mount - SPLIT
door ItzEvolv
3
Downloads
0
Likes
0
Makes
This is a remix of the (brilliant) design made by marcelomorais, found here: https://www.thingiverse.com/thing:5978144 - This remix still keeps the great & easily attachable mount in tact, but makes it more easily printable.
We decided to cut the design in half and add holes in the corners to mount the two pieces together with bolts (4x m2*6). Our motivation for this was to make it easier to print. This change also results in the overhanging parts being stronger when printed in this orientation.
The GoPro mount fits perfectly tight in this mount. We did not place threaded inserts in the bottom part as the bolts itself are enough to secure the two parts together VERY tightly. The bolts are absolutely not coming out in our case (check for yourself, on your own risk, you can of course still choose to add threaded inserts if you'd like).
The print in the sample pictures was done in PETG at 100% infill, at 35mm/s - The object shrinks a tiny bit but was still printed at 100% size, t
We decided to cut the design in half and add holes in the corners to mount the two pieces together with bolts (4x m2*6). Our motivation for this was to make it easier to print. This change also results in the overhanging parts being stronger when printed in this orientation.
The GoPro mount fits perfectly tight in this mount. We did not place threaded inserts in the bottom part as the bolts itself are enough to secure the two parts together VERY tightly. The bolts are absolutely not coming out in our case (check for yourself, on your own risk, you can of course still choose to add threaded inserts if you'd like).
The print in the sample pictures was done in PETG at 100% infill, at 35mm/s - The object shrinks a tiny bit but was still printed at 100% size, t
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
