IEE VFD Enclosure Control Box

Updated source code: https://github.com/truglodite/3D-Printer-Enclosure

I designed this for my Lack enclosure arduino control panel circuit featuring a 7.75" 2x20 IEE VFD. The model number of my VFD is 05464ASSY35119, but there are other 7.75" 2x20 IEE models that may also fit. The buttons are ubquitous 6mm square momentary NO switches you can get everywhere for pennies. Assembly will require 10x hard drive mount screws or similar, and 4 mounting screws the type which will depend on what you are mounting it to.

There are 2 compartments, a button mount, and a mounting flange to print. The VFD compartment contains the VFD and buttons. The switches are friction fit in the mount, then the mount is screwed to the VFD box behind the printed buttons. The rear compartment houses the arduino, fets, and 5V supply, and gets screwed on to the VFD compartment with 4 screws. I just added a bunch of ziptie anchors that I used to secure the boards & wiring since none of my electronics used mount