Igris – Hueforge

Igris – Shadow Soldier from Solo Leveling Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 132.3x235mm in sizeYou may print at higher layer heights below the Base Thickness of 1.6mmThe Max allowed Thickness is 3.36mm and the Actual Thickness is 3.28mm Filaments Used: #080a0d PLA BambuLab Matte Charcoal Transmission Distance: 0.3 #1c254c PLA BambuLab Matte Dark Blue Transmission Distance: 1 #de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 5 #757575 PLA BambuLab Matte Nardo Gray Transmission Distance: 0.7 #8bd5ee PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 6 unique filaments Swap Instructions: Start with Charcoal At layer #20 (1.68mm) swap to Dark Blue At layer #23 (1.92mm) swap to Scarlet Red At layer #27 (2.24mm) swap to Nardo Gray At layer #28 (2.32mm) swap to Ice Blue At layer #35 (2.88mm) swap to Ivory White for the rest.