Iguana Painting

It is better to use non-glossy plastic. You can also lower the temperature for a matte finish.
After the first layer, you can lower the flow_rate to even out and eliminate all overextrusions.

First layer height 0.20mm then 0.08mm for all other.

Filament color:
0 - black
9 - violet
12 - red
13 - blue
16 - green
19 - lime
22 - purple
24 - beige
28 - white-phosphorescent


210 x 210 x 3mm ~ 10hours

105 x 105 x 3mm (50% x 50% x 100%) ~ 4 hours

Photo:
![Photo 1](https://media.printables.com/media/prints/693000/rich_content/67885583-4f2e-47d3-91df-299f65147490/thumbs/inside/1920x144