Igus Block For AM8

These are bearing blocks i made for my AM8 for the igus bearings, you can control how much press you have on them by tightening/loosing the top M3 screws. Be careful when installing the M4 nuts as they are a tight fit and you may need to heat them a tad, mine fit nice but everyones printer is different. THESE WILL BE TOO LONG FOR THE STANDARD ANET A8 AND WILL HIT THE ACRYLIC FRAME, ALSO BE AWARE OF YOUR X BELT HOLDER IF ISN’T THE STOCK ONE THAT THE BELT JUST WRAPS AROUND THE 2 M3 SCREWS THEY MAY BE TO BIG TO FIT BETWEEN THE BLOCKS, IM WORKING ON ONE THAT SHOULD WORK.I've also added a block i used for my ramps as well as the mount for the endstop.