Slicer Discord
Ikea FINTORP Drip tray insert – 3D printable model from MakerWorld MakerWorld
Other House Models

Ikea FINTORP Drip tray insert

1 Downloads
0 Likes
0 Makes
Go to Model
This is a 2 part insert for the IKEA FINTORP drip tray to allow for a better handling of smaller items, as these tended to fall through the original grate. STL needs to be split to objects in order to print on separate plates. 0 top/bottom layers and I suggest honeycomb infill, 10-15%, depending how big do you want the holes to be. 4 walls if printed with 0.4 nozzle, 3 walls if with 0.6. Remove the 1 perimeter option for top layer, unless you want the infill pattern also on the top walls - see published print profile. Just put bottom edges together at 45ish degrees and twist closed. Should fit nicely and works well.
Category
Other House Models
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
2-part assembly
Supports 1/3
Assembly 1/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

Adam5zki also publishes on

10 additional models across 2 more platforms

Verified by matching model titles across platforms.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection