Thingiverse
Ikea Hemma Mounting Bracket
por ctheroux
8
Descargas
14
Likes
1
Makes
This is a mounting bracket for the Ikea Hemma light socket (E26). It is
articulated in the Z axis. You will also need 2 hex bolts (1/4" x 3/4" or any
equivalent) and the 2 matching butterfly nuts in order to assemble it.
There is a 7 mm hole in the base to mount the bracket on a device such a
tripod, etc. The base is 10 cm x 3cm. The overall height of the bracket is 14
cm.
The holder should be printed upside down. A brim might be required. I did not
needed it.
They can be printed without support.
This object main web page is:
http://www.ctheroux.com/ikea-hemma-mounting-bracket/.
You can request the source files on the page listed above.
articulated in the Z axis. You will also need 2 hex bolts (1/4" x 3/4" or any
equivalent) and the 2 matching butterfly nuts in order to assemble it.
There is a 7 mm hole in the base to mount the bracket on a device such a
tripod, etc. The base is 10 cm x 3cm. The overall height of the bracket is 14
cm.
The holder should be printed upside down. A brim might be required. I did not
needed it.
They can be printed without support.
This object main web page is:
http://www.ctheroux.com/ikea-hemma-mounting-bracket/.
You can request the source files on the page listed above.
ctheroux también publica en
406 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!