Ikea Lack Corner Bracket - Double Thickness Remix

This model is resliced to add better stabilization to the Ikea lack and can be used in addition to traditional lack corner brackets. When I first printed the original model I noticed it had a rigidity issue, the part itself flexed due to how thin it was (4mm), this light remix doubles the thickness to 8mm on z-axis without changing X or Y scale. Materials Needed to Mount:For mounting all you need is (5) #10 or #10 Philips or Torx screws (wood or deck screws) per corner, ~1" (25.4mm) length is ideal and drill bits to drill the pilot holes for the screws. Be sure not to over tighten or else the PETG will crack. Note: The best screws for Ikea lack usage will heave threads close to the drive/head portion of the screw. Mounting Orientation:When mounting the corners, I advise to fully assemble the Ikea lack table and then add these after all other corner and extension brackets have been added.Print Profile Notes:Nozzle: Suggest 0.6mm nozzle for fastest print time, 0.4mm will work just fi