Ikea Lack table brackets

We all love the Ikea Lack system, but if you don't want to screw the tables together, then you need something a little sturdy, but can still be removed if you want to disassemble the stack for whatever reason.Also included is a plate of the middle brackets for attaching the larger 90*55 coffee table to the 55*55 side table, just in case you're like me and have the coffee table as well as the side table for extra storage :DPrinting TipsRecommended material: PLA or PETG for durability. You can be extra and use -CF if you really need to...Layer: 0.2mm+. It's not going to be pretty, it's going to be STRONK.Infill: Gyroid 10%+ (aligned rectilinear if you're using a CF filament)Assembly InstructionsAttach the brackets to the corner of the lower table, they should click pretty enthusiastically into place. Slide the upper table into place in the top of the brackets. For the middle ones, for attaching the 55cm table on top of a 90cm coffee table, attach the corners, and slide the middle ones into roughly the right place, then lower and adjust as needed. It is trickier because the middle ones will slide, and they need to go in ideally straight.