Ikea Lack Table Leg Bracket

I noticed my Ikea Lack table was a bit wobbly, so I designed this bracket.

You will need 4 brackets in total, one for each leg. They are designed for size 6 screws, with enough holes for 7 in each bracket, which is definitely overkill, so you can probably get away with fewer.

I have included models that have the following on each hole:
-An 82 degree countersink, designed for standard wood screws.
-A more shallow countersink, designed for drywall screws.
-No countersink, designed for normal pan head screws.

These brackets paired with a foam mat below the table have reduced vibration caused by the printer almost entirely.