IKEA mirror mounts/holder

I designed this to mount my IKEA mirrors to the wall, I have 4 mirrors so I also designed mounts that go between 2 mirrors so i don't have a big gap if I had used the other one.

I used E-PLA because its the only material i have on hand.

Printing:
MirrorMount2SideV1.2 and MirrorMountV1.2 can be printed with no supports.

My settings:
Layer Height = 0.2
Infill Density = 20.0
Hot-end temp = 210 c
Bed temp = 60 c
Printing Speed = 50 mm/s

You can change your settings to suit your printer.

When Installing, I used 4 cm long M4 wood screws.