Thingiverse
IKEA Silverglans LED plug
by wildwindpoyo
4
Downloads
0
Likes
0
Makes
I wanted to use IKEA Silverglans LED driver with my custom made led strip and I could not find a spare plug to buy so I made my own.
I used a 2.54mm dupont female connector and soldered it to the wire, pushed it inside the socket from below. Had to clean the hole a little before.
20% Infill (does not matter actually)
0.12 Layer height
Printed with PLA
I used a 2.54mm dupont female connector and soldered it to the wire, pushed it inside the socket from below. Had to clean the hole a little before.
20% Infill (does not matter actually)
0.12 Layer height
Printed with PLA
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
