IKEA work desk

Wanted a huge desk for my computer, work and misc, without any middle leg/support so I can move freely from side to side in the office chair. Resulting desk is strong enough to handle 100kg load placed in the middle.

Build photos: https://imgur.com/a/R3ZLeOs

**Shopping list:**
**IKEA**
- 2x - Linnmon: https://www.ikea.com/cz/cs/catalog/products/20251139/
Structure: https://www.youtube.com/watch?v=9vNRY6natiY
- 5x - Olov: https://www.ikea.com/cz/cs/catalog/products/10264302/#/70266671

**Metallurgical**
Pipe length is only approximate. Once obtained cut preciselly to align with solid mount points on the desks. If you don't know where the mount points are check the strucutre video linked above.
- 2x - 300 cm 25x25mm square pipe (front, back)
- 3x - 60 cm 20x20mm square pipe (left, middle, right)
- 20x - screws to replace original IKEA Olov as we need them 30mm longer than original - 55mm long with 4 or 5mm diameter are ok
- 8x - KNAUF TN35 - used on the clamps, redesign