Impala Hueforge

THIS IS PRINTED AT A .04mm LAYER HEIGHT! Project: Impala.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.6mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #007672 PLA Paramount 3D Mid Century Teal Transmission Distance: 2 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #5d2a2c PLA Paramount 3D Black Cherry Transmission Distance: 2 #de1619 PLA PolyTerra Lava Red Transmission Distance: 1 #d68228 PLA Elegoo Orange Transmission Distance: 5.2 #f0be02 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #17 (0.8mm) swap to Mid Century Teal At layer #19 (0.88mm) swap to Blue Gray At layer #25 (1.12mm) swap to Black Cherry At la