Thingiverse

Impel Down Emblem

by silliestwizard

0 Downloads

0 Likes

0 Makes

Intentionally made it for Shiryu of the Rain cosplay but it works for most Impel Down staff cosplay as well! (i.e. Magellan, Hannyabal, etc)
design made for hat & belt
roughly 4x2", may need scaling depending on your needs.

supports optional if you want the crown beads to print perfectly

Source

Thingiverse

What you need to print this: Beginner Low confidence

Why?

print-in-place design · very large print

Print-in-place May need scaling or splitting

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 3/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

300 mm (Extra large)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Impel Down Emblem?

Any FDM printer should handle Impel Down Emblem just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 300 mm is recommended.

Does Impel Down Emblem need supports when printing?

Nope — Impel Down Emblem is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

What file format is Impel Down Emblem available in?

Impel Down Emblem is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Impel Down Emblem free to download?

Yes, Impel Down Emblem is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Impel Down Emblem

Add to Collection