Improved Riser Feet for Aquila

There were certain things I liked about both riser feet from leaftye (https://www.thingiverse.com/thing:4899873) and kedennis182 (https://www.thingiverse.com/thing:4947299) and combined them into something I wanted. A more solid structure riser foot that used the rails and no hardware, as well as properly secured the original rubber foot. I have increased the overall size, without the rubber foot it comes in at 60mm or 2 3/8" and with coming at 63.5mm or 2.5". I have also tightened the grip on the rubber foot from leaftye's original so it holds more securely and doesn't rely on the old, worn-out adhesive sticker.

It is recommended that you print them standing up and with supports. I found that also printing them standing up gave them a brushed metal appearance rather than the typical 3D lines.

In Cura, I used the following settings and the supports popped right off.
Support Structure: Normal
Support Placement: Everywhere
Overhang angle: 50%
Pattern: Zig Zag
Support Density: