Improved Skadis Mounting System

Tired of your Skadis pegboard pulling away from the wall any time you take something off of it? I know I was, so I designed some spacers and adapters to allow it to be screwed to the wall at the bottom corners and center. The setup I went with uses the stock mounting bar system, but my spacers could be used at all four corners as long as you are screwing into a stud or using appropriate anchors. I just used drywall screws with no anchors as the top mounting bar supports all of the load and the added screws are only there to prevent the board from being pulled away from the wall. The center screw is optional for additional sturdiness. If you choose to install it, do not use a screw adapter to allow the screw to mount flush to the face of the board so nearby mounting holes can still be used. The screw adapters were designed to match the stock screw diameter and work great with these screw covers (I used the 14.1mm variant).