Thingiverse
Incense holder
par Moore_Retro
1
Téléchargements
2
Likes
0
Makes
This was made on a CNC. The first edition had a hole that was too large. You will need the following if you plan to make this.
1/8" ball end mill or 3-4mm endmill
1/16" twist drill or 1.5-1.6mm drill bit
Wood that is at minimum 100mm x 100mm x 25mm or 4" x 4" x 1"
Use whatever print settings you desire, if you print it.
DO NOT use a 1/8 endmill to make the hole. that's too big, and it will cause you a massive headache. The proper sized hole had to be drilled out afterwords, to my dismay.
1/8" ball end mill or 3-4mm endmill
1/16" twist drill or 1.5-1.6mm drill bit
Wood that is at minimum 100mm x 100mm x 25mm or 4" x 4" x 1"
Use whatever print settings you desire, if you print it.
DO NOT use a 1/8 endmill to make the hole. that's too big, and it will cause you a massive headache. The proper sized hole had to be drilled out afterwords, to my dismay.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
